[karimoux]

 

WinToUSB 2.0 Final





WinToUSB is a free software that allows you to install and run ******s operating system on a USB hard drive or USB flash drive, using an ISO image or CD/DVD drive as the source of installation. WinToUSB also support creating bootable WinPE USB drive, it can help you to transfer the contents of WinPE to the USB drive and make the drive bootable.

WinToUSBs key features include:
Easy-to-use wizard interface that provides step-by-step instructions for installing ******s/WinPE on a USB drive.
Install ******s/WinPE from an ISO image or CD/DVD drive.
Support for ******s 7/8/8.1/10 Technical Preview/2008 R2/2012/2012 R2 and WinPE 2/3/4/5.
Use any edition of ******s 8/8.1/10 Technical Preview to create ******s To Go USB drive.
Support for MBR and GPT disk layouts.
Dont need install WAIK (******s Automated Installation Kit) or WADK (******s Assessment and Deployment Kit).

Important notes:
******s 7/2008 R2 does not have built-in USB 3.0 support, so ******s 7/2008 R2 will have to be booted from a USB 2.0 port.
USB flash drives are very slow. It takes a long time to install and run ******s from a USB flash drive, highly recommend using a USB hard disk or ******s To Go Certified Drives.
******s To Go drives can be booted on different computers, so you can carry it to anywhere and use it on any computer.
******s 7/2008 R2 is not completely portable. You may have activation and driver problems when booting on different computers.
You need to be an administrator on the computer you are installing the WinToUSB on.

System requirements
******s XP or later (32/64-bit).
Intelآ® Pentiumآ® processor.
256MB of available RAM (512MB or more recommended).
10MB of free space on your hard drive.
800x600 graphic device (higher resolution recommended).



SIZE: 3 MB

megauplaod
DOWNLOAD

MediaFree
DOWNLOAD

Turbobit
DOWNLOAD

up07
DOWNLOAD

4downfiles
DOWNLOAD

letitbit
DOWNLOAD

__DEFINE_LIKE_SHARE__